The 2009 
			International Building Code (IBC) covers all buildings except 
			detached one and two family dwellings and townhouses not more than 3 
			stories in height. 
			This comprehensive code features time-tested 
			safety concepts, structural, and fire and life safety provisions 
			covering means of egress, interior finish requirements, 
			comprehensive roof provisions, seismic engineering provisions, 
			innovative construction technology, occupancy classifications, and 
			the latest industry standards in material design. 
			It is founded on broad-based principles that 
			make possible the use of new materials and new building designs.
			
			
			more info:
			The International Building Code® 
			(IBC) is a model code that provides minimum requirements to 
			safeguard the public health, safety and general welfare of the 
			occupants of new and existing buildings and structures. The IBC is 
			fully compatible with the ICC family of codes, including: International Energy Conservation Code® (IECC®), 
			International Existing Building Code® (IEBC®), International 
			Fire Code® (IFC®), International Fuel Gas Code® (IFGC®),
			International Mechanical Code® (IMC®), ICC Performance 
			Code® (ICCPC®), International Plumbing Code® (IPC®), International 
			Private Sewage Disposal Code® (IPSDC®), International 
			Property Maintenance Code® (IPMC®), International Residential 
			Code® (IRC®), International Wildland-Urban Interface Code™ 
			(IWUIC®) and International Zoning Code® (IZC®). 
The IBC addresses structural strength, means of egress, sanitation, 
			adequate lighting and ventilation, accessibility, energy 
			conservation and life safety in regards to new and existing 
			buildings, facilities and systems. The codes are promulgated on a 
			3-year cycle to allow for new construction methods and technologies 
			to be incorporated into the codes. Alternative materials, designs 
			and methods not specifically addressed in the code can be approved 
			by the code official where the proposed materials, designs or 
			methods comply with the intent of the provisions of the code (see 
			Section 104.11). 
The IBC applies to all occupancies, including one- and two-family 
			dwellings and townhouses that are not within the scope of the IRC. 
			The IRC is referenced for coverage of detached one- and two-family 
			dwellings and townhouses as defined in the Exception to Section 
			101.2 and the definition for "townhouse" in Chapter 2. The IBC 
			applies to all types of buildings and structures unless exempted. 
			Work exempted from permits is listed in Section 105.2. 
Arrangement and Format of the 2009 IBC 
			
Before applying the requirements of the IBC, it is beneficial to 
			understand its arrangement and format. The IBC, like other codes 
			published by ICC, is arranged and organized to follow sequential 
			steps that generally occur during a plan review or inspection. 
 
			
				
					| Chapters | 
					Subjects 
					 | 
				
				
					| 1-2  | 
					Administration and definitions 
					 | 
				
				
					| 3  | 
					Use and occupancy classifications | 
				
				
					| 4,31 | 
					Special requirements for specific 
					occupancies or elements | 
				
				
					| 5-6 | 
					Height and area limitations based on 
					type of construction | 
				
				
					| 7-9 | 
					Fire resistance and protection 
					requirements | 
				
				
					| 10 | 
					Requirements for evacuation | 
				
				
					| 11 | 
					Specific requirements to allow use 
					and access to a building for persons with disabilities | 
				
				
					| 12-13,27-30 | 
					Building systems, such as lighting, 
					HV AC, plumbing fixtures, elevators | 
				
				
					| 14-26 | 
					Structural components-performance and 
					stability | 
				
				
					| 32  | 
					Encroachment outside of property 
					lines | 
				
				
					| 33 | 
					Safeguards during construction | 
				
				
					| 34 | 
					Existing building allowances | 
				
				
					| 35 | 
					Referenced standards | 
				
				
					| Appendices A-K | 
					Appendices | 
				
			
			The IBC requirements for high hazard, 
			fire-resistance-rated construction, interior finish, fire protection 
			systems, means of egress, emergency and standby power, and temporary 
			structures are directly correlated with the requirements of the IFC. 
			The following chapters/sections of the IBC are correlated to the IFC:
			
			
				
					| 
					 IBC Chapter/Section  | 
					
					 IFC  Chapter/Section  | 
					
					 Subject 
					  | 
				
				
					| Sections 307,414,415 | 
					Chapters 27-44 | 
					High-hazard requirements  | 
				
				
					| Chapter 7 | 
					Chapter 7  | 
					Fire-resistance-rated construction | 
				
				
					| Chapter 8 | 
					Chapter 8 | 
					Interior finish, decorative materials 
					and furnishings  | 
				
				
					| Chapter 9 | 
					Chapter 9 | 
					Fire protection systems | 
				
				
					| Chapter 10 | 
					Chapter 10 | 
					Means of egress  | 
				
				
					| Chapter 27 | 
					Section 604  | 
					Standby and emergency power 
					 | 
				
				
					| Section 3103 | 
					Chapter 24 | 
					Temporary structures | 
				
			
			The IBC requirements for smoke control 
			systems, and smoke and fire dampers are directly correlated to the 
			requirements of the IMC. IBC Chapter 28 is a reference to the IMC 
			and the IFGC for chimney, fireplaces and barbeques, and all aspects 
			of mechanical systems. The following chapters/sections of the IBC 
			are correlated with the IMC: 
			
				
					IBC Chapter/Section | 
					IMC Chapter/Section | 
					Subject | 
				
				
					| Section 716 | 
					Section 607 | 
					Smoke and fire dampers  | 
				
				
					| Section 909 | 
					Section 513 | 
					Smoke control  | 
				
			
			The IBC requirements for plumbing fixtures and 
			toilet rooms are directly correlated to the requirements of the IPC. 
			The following chapters/sections of the IBC are correlated with the 
			IPC:
			
				
					IBC Chapter/Section | 
					IPC Chapter/Section | 
					Subject 
					 | 
				
				
					| Chapter 29 | 
					Chapters 3 & 4 | 
					Plumbing fixtures and facilities | 
				
			
			
				CHAPTER 1 ADMINISTRATION 
				- Chapter 1 establishes the limits of applicability of the code 
				and describes how the code is to be applied and enforced. 
				Chapter 1 is in two parts, Part I-Scope and Application 
				(Sections 101-102) and Part 2-Administration and Enforcement 
				(Sections 103-116). Section 101 identifies which buildings and 
				structures come under its purview and references other ICC codes 
				as applicable. Standards and codes are scoped to the extent 
				referenced (see Section 102.4). 
The building code is intended to be adopted as a legally 
				enforceable document and it cannot be effective without adequate 
				provisions for its administration and enforcement. The 
				provisions of Chapter I establish the authority and duties of 
				the code official appointed by the jurisdiction having authority 
				and also establish the rights and privileges of the design 
				professional, contractor and property owner.
            
				CHAPTER 2 DEFINITIONS 
				- All terms that are defined in the code are listed alphabetically 
				in Chapter 2. Terms are defined in Chapter 2 or there is a 
				reference to the section where the definition is located. While 
				a defined term may be listed in one chapter or another, the 
				meaning is applicable throughout the code. 
Codes are technical documents and every word, term and 
				punctuation mark can impact the meaning of the code text and the 
				intended results. The code often uses terms that have a unique 
				meaning in the code and the code meaning can differ 
				substantially from the ordinarily understood meaning of the term 
				as used outside of the code. Where understanding of a term's 
				definition is especially key to or necessary for understanding a 
				particular code provision, the term is shown in italics 
				wherever it appears in the code.
				CHAPTER 3 USE AND OCCUPANCY 
				CLASSIFICATION
				CHAPTER 4 SPECIAL DETAILED 
				REQUIREMENTS BASED ON USE AND OCCUPANCY
				CHAPTER 5 GENERAL BUILDING 
				HEIGHTS AND AREAS
				CHAPTER 6 TYPES OF 
				CONSTRUCTION
				CHAPTER 7 FIRE AND SMOKE
				PROTECTION FEATURES
				CHAPTER 8 INTERIOR FINISHES
				CHAPTER 9 FIRE PROTECTION 
				SYSTEMS
				CHAPTER 10 MEANS OF EGRESS
				CHAPTER 11 ACCESSIBILITY
				CHAPTER 12 INTERIOR 
				ENVIRONMENT
				CHAPTER 13 ENERGY EFFICIENCY
				CHAPTER 14 EXTERIOR WALLS
				CHAPTER 15 ROOF ASSEMBLIES 
				AND ROOFTOP STRUCTURES
				CHAPTER 16 STRUCTURAL DESIGN
				CHAPTER 17 STRUCTURAL TESTS 
				AND SPECIAL INSPECTIONS
				CHAPTER 18 SOILS AND 
				FOUNDATIONS
				CHAPTER 19 CONCRETE
				CHAPTER 20 ALUMINUM
				CHAPTER 21 MASONRY
				CHAPTER 22 STEEL
				CHAPTER 23 WOOD
				CHAPTER 24 GLASS AND GLAZING
				CHAPTER 25 GYPSUM BOARD AND 
				PLASTER
				CHAPTER 26 PLASTIC
				CHAPTER 27 ELECTRICAL
				CHAPTER 28 MECHANICAL SYSTEMS
				CHAPTER 29 PLUMBING SYSTEMS
				CHAPTER 30 ELEVATORS AND 
				CONVEYING SYSTEMS
				CHAPTER 31 SPECIAL 
				CONSTRUCTION
				CHAPTER 32 ENCROACHMENTS INTO 
				THE PUBLIC RIGHT-OF-WAY
				CHAPTER 33 SAFEGUARDS DURING 
				CONSTRUCTION
				CHAPTER 34 EXISTING 
				STRUCTURES
				CHAPTER 35 REFERENCED 
				STANDARDS
				APPENDIX A EMPLOYEE 
				QUALIFICATIONS
				APPENDIX B BOARD OF APPEALS
				APPENDIX C GROUP 
				U—AGRICULTURAL BUILDINGS
				APPENDIX D FIRE DISTRICTS
				APPENDIX E SUPPLEMENTARY 
				ACCESSIBILITY REQUIREMENTS
				APPENDIX F RODENTPROOFING
				APPENDIX G FLOOD-RESISTANT 
				CONSTRUCTION
				APPENDIX H SIGNS
				APPENDIX I PATIO COVERS
				APPENDIX J GRADING
				APPENDIX K ADMINISTRATIVE
				PROVISIONS
INDEX