|
Related:
Eagle Gear Cable
Installation Kits
Switch Bit - Interchangeable
Flex Bit System
* *
* *
* *
*
Dirt Auger System
* *
* *
* *
*
Cable Bit
- Flexible Installer Bits & Accessories
* *
* *
* *
*
Bumper Balls Flex Bit Placement Guide
* *
* * * * *
Fish Sticks - Fiberglass
Wire Fishing Rods
* *
* * * * * |
Flex Bit Safety Tips and Warnings:
- Always use two hands on your power drill.
- Always use safety glasses.
- Always locate hidden wiring in the wall
and in blind areas.
- Always locate plumbing.
- Always turn off all power and water to
the work area
Using Flex Bits:
- When using Switch
Bits, Adapters and Extensions, make sure set screw faces flat
side of shank.
- Never overtighten a Switch Bit set screw.
"Snug is Good."
- To prevent binding, reverse the bit a
little ways, then drill in again.
- A
Flex Bit Placement
Tool helps bend the Flexible Bit, positioning the Drill
Bit inside the wall (or ceiling) cavity.
How to
Install Recessed Lights with a Flex Bit:
|
Install an Outlet
Tip:
A Flex Bit Placement
Tool helps bend the Flexible Bit, positioning the Drill Bit
inside the wall:
**
Use for Guiding
Dirt Auger Too!
Flex Bit Placement Tool |
 |
Standard wall framing is 16� from center of a 2x4 to
center of the next 2x4. Most drill bits will not fit between the framed
sections with a standard hand drill so a straight hole is impossible to
drill.
The Switch Bit Hex Adaptor
(Quick Switch), and the hand drill
measure an average of 14� and will fit between the 2x4�s to make a
straight hole.
*
* * * * * *
Eagle Gear Wire, Cable Pulling &
Installation Kits
*
* * * * * *
|
|
Order online:
Add 
Order offline: 
