MT6
Electronic Metal
Detector & Locator
Recommended Tool for Hurricane Loss Mitigation
An
advanced user interface makes the MT6 the
easiest metal finder ever.
Find metal up to 6 inches
(154 mm) deep through solid concrete or find pipes and junction
boxes behind tile—before you ruin expensive drill bits or saw
blades.
It automatically differentiates
between magnetic metal (such as rebar) and nonmagnetic metal (such
as copper pipe).
The LCD graphics are easy to read and easy to interpret. The
screen pinpoints the
location of metal objects to the nearest inch, and depth to the
nearest 1/2 inch.
Features:
- Locates metal up to 6 inches deep
- Finds all types of metal
- Identifies magnetic vs. nonmagnetic
- Indicates depth of metal found
- Large LCD screen
- Tough for jobsite use
Applications:
Find rebar, metal pipes,
conduit, and plumbing before:
- Drilling into slabs for anchor bolts
- Coring through floors for wire bundles
- Cutting openings in concrete walls
- Drilling to add rebar to slab joints
- Estimating a demolition job
– Find nails in used lumber before sawing, planing or sanding
Specifications:
Dimensions |
8.87 in. L x 3.84 in. W x
2.23 in. D |
Weight |
10.1 oz. (286 g) without
battery |
Battery type |
9-V alkaline
(not included) |
Position Accuracy |
Center of #4 (1/2 in.)
rebar or 1/2 in. copper pipe at a minimum grid spacing of 6
in. typically within 1/2 in. |
Depth |
Up to 6 in. +/-
1 in. |
Operating temperature |
20° to 120°F (-7° to 49°C) |
Storage temperature |
-20° to 150°F (-29° to
66°C) |
Humidity |
80% RH (noncondensing) |
Water resistance |
Splash and water resistant,
not waterproof |
|